num_cfd_results not generated« Back to Questions List

Using MantiumFlow_MVRC2017-5_win along with blueCFD and the simulation runs to completion but when I go to post processing I get no num_cfd_results file not generated so when viewing the report I only get the intake, exhaust and hx monitor figures, nothing for force coefficients.
Posted by RicME Motorsport
Asked on August 1, 2017 09:54
0

Had a response on F1technical last night which said the same, I didn’t realise there was a v6. Downloaded and ran it overnight and can confirm the issue is fixed.

Posted by RicME Motorsport
Answered On August 2, 2017 09:20
0

Ah, only now I see you are using MFlow 2017.5, you should be using 2017.6. That version fixes excatly that issue. I have tested it on your case and it works.

Posted by MCAE Support
Answered On August 2, 2017 08:33
0

Im uploading now. I have zipped the whole folder with the processor folders deleted so its basically the same as what MFlow produces from ’build case’ plus the post processing so you can see what the result is (lack of info).

Posted by RicME Motorsport
Answered On August 1, 2017 18:19
0

Please send me the case through Dropbox and I will have a look.

Posted by MCAE Support
Answered On August 1, 2017 11:14