Running case causes Windows PC to freeze« Back to Questions List

I have updated my BlueCFDCore to 2017-2 and running the latest MantiumFlow. I can open a case, build a case but when I try and run a case after a while my pc freezes. The last thing that appears in the mesh.log file is Determining initial surface intersections ----------------------------------------- Edge intersection testing: Number of edges : 48825000 Number of edges to retest : 48825000 I have tried changing the number of CPUs from 4 to 2 to see if it is resource related but still the same issue. Never had a single run freeze before new mantiumflow/BlueCFDCore
Posted by MercuryMotorsport
Asked on July 17, 2018 23:16
0

so the case running on a new machine with all the latest versions is successful.

Posted by MercuryMotorsport
Answered On July 24, 2018 02:36
0

OK, lets hope that it works for you now. The Dropbox folder should have enough space now.

Posted by MCAE Support
Answered On July 23, 2018 09:19
0

just copied the case over to a new machine with a fresh install of BlueCFD and the 2018-7c version of mantium flow and it has got further than before, i will monitor and update

Posted by MercuryMotorsport
Answered On July 23, 2018 03:26
0

tried to upload but could not as Dropbox was full.

Posted by MercuryMotorsport
Answered On July 23, 2018 01:26
0

I will send you a link to upload your case.

Posted by MCAE Support
Answered On July 18, 2018 08:40
0

just to give a bit more detail
os: Windows 10 1703 Build 15063.850
cpu: i7 7700 4core 3.6ghz
ram: 16gb
os disk: SSD
MantiumFlow MVRC-2018.07b
BlueCFD-Core2017 2017.2.0.0
Microsoft MPI 7.1.12437.25 (as installed by BlueCFD)

Posted by MercuryMotorsport
Answered On July 18, 2018 03:05